Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Pattern Corrections + Errata
No matter how many editors and testers review a pattern, there are sometimes misprints or errors! Please make note of these.
Please note: Some of you may have updated patterns and the errata have been fixed in your copy.
Last updated: February 1st 2026
Traverse
Page 7 SQUARE DOTS:
The cutting instructions for Fabrics R, W & U in the printed pattern book are a bit unclear. Below are the updated cutting instructions:
Fabrics R, W and U: From each, cut (5) strips 1 ½" by WOF. Keep one strip whole. Trim 4 of the strips from each color down to 36 ½" lengths. From the offcuts, cut (4) 1 ½" x 3" pieces.
Page 8 HOURGLASS:
The pattern says the row measures 6" x 72 ½" unfinished, the correct measurement is 6 ½"x 72 ½".
Roam
Page 16 SEWING THE SMALL ON-POINT BLOCK:
Step 1- The strip set should measure 5" high (not 5 ½")
Page 17 FOUR PATCHES AND DIAMOND ROWS:
Under ALTERNATE CUTTING: Cut from Fabric O: (4) 2 ¼" x 5 ½" rectangles, (4) 2 ¼" x 7 ¼" rectangles, and (8) 2 ¼" x 8 ⅞" rectangles.
Ramble
ASSEMBLY DIAGRAMS:
Pages 23 & 29: The diagram shows the dark pink in the Hourglass Row facing the outside of the block. This is incorrect and the correct orientation of the row is shown on the cover quilt.
Page 9: 9-PATCH ROWS
Fabric E cutting has been updated. You will have enough fabric to cut as originally stated, but the cutting instructions below allow for more wiggle room on the yardage.
Fabric E:
(1) 2 ¾" x WOF strip; subcut (7) 2 ¾" x 4 ¼" pieces, (1) 2" x 4 ¼" piece and (3) 1 ¼" x 4 ¼" pieces.
(2) 1 ¾" x WOF strips
(4) 1 ¼" x WOF strips; subcut (2) 1 ¼" x 24 ½" strips and (2) 1 ¼" x 29 ¾" strips.
Invalid password
Enter